Stripped Screws

dewalt-13q2-DC825B-main-lgThe Impact Driver tool is the most effective screw gun on the market. It takes very little effort and gets the job done fast for any project! Always remember to check the volts before buying this tool. The volts will dictate how much power it has and the higher the Torque or Volts, the more power it will have.

If you ever run into a striped screw that cannot be removed, try to follow some of our simple tricks below.

tip-18

 

 

 The Rubber Band Trick

Using a wide rubber-band, place it on top of the striped screw head and try to unscrew it slowly while pushing firmly into the screw. Sometimes the rubber will give you extra grip needed to get the screw out.

17jgtrxb51ektjpg

 

 

 The Dremel Tool Trick

When using a dremel tool, cut a notch in the screw head. Then take a flat-head screw driver and try and unscrew it using the cut you created.

nbfg5-2

 

  

The Easy Out Screw Extractor 
Using an “easy-out” screw extractor is one of the easiest methods because it works almost every time and with little effort. These are not expensive and can save you a lot of time messing with stripped screw

facebook-dk googleplus-dk youtube-dk